Fitting a cover does not remove water trapped in a backyard pool’s circulation system. After reviewing Dickson Family Pools & More’s guide to small-space fiberglass pool installation, pool owners should establish a closing routine to prepare both the shell and equipment for freezing weather.

Dickson Family Pools & More assists homeowners with seasonal closings alongside fiberglass pool installation in Taylors, SC. Its professional guidance on winterizing a fiberglass pool distinguishes standard equipment drainage from managing water retained inside the shell.

Equipment Checks for Fiberglass Pool Winterization in Taylors

Water trapped in circulation equipment or plumbing can freeze and expand, cracking fittings or damaging equipment. Freeze protection means identifying and draining these spaces before overnight temperatures drop below freezing.

Pool equipment protection requires attention to components with different closing procedures:

• Pumps and filters: Empty water from the pump’s basket compartment and the filter housing.

• Heaters and chlorinators: Drainage procedures depend on the manufacturer’s instructions for each unit.

• Skimmer and return connections: A professional can use compressed air to expel water from pool plumbing lines, then seal the openings.

Manufacturer winterization guidance emphasizes switching off the pump before draining connected equipment.

Retaining Water Without Leaving Plumbing Exposed

Dickson Family Pools & More advises against emptying the shell when preparing a fiberglass pool for winter. The water’s weight helps counter pressure from the surrounding soil. Removing too much can allow groundwater pressure to deform the walls or pull them away from the surrounding deck.

Pool and cover instructions determine the proper winter pool water level, which may remain at operating height or sit just beneath the skimmer. A special plug protects the skimmer without draining more water, while a cover pump handles rainfall that accumulates above a solid cover.

Scheduling Fiberglass Pool Winterization in Taylors

Water consistently below approximately 65 degrees Fahrenheit signals the time to start preparations. Close before the season’s first hard freeze, and schedule testing about a week earlier to allow time for chemical adjustments.

Recommended closing values are a pH of 7.2–7.4 and total alkalinity of 80–120 parts per million. Fiberglass-compatible winterizing kits may combine an algaecide with a stain-and-scale prevention product.

Excess calcium can leave chalky deposits on a fiberglass surface, especially when pH rises. A pool professional can check calcium hardness before choosing chemicals for the seasonal closing.

Matching Cover Care to the Installed System

When closing a fiberglass pool for winter, consider the cover’s material and attachment method separately. A solid winter pool cover blocks sunlight to limit algae growth, while mesh admits rain and intercepts debris.

Deck-mounted anchors hold safety-cover straps at the specified tension, while perimeter water bags usually let the cover rest against the water with some slack. Throughout winter, solid covers need their leaves cleared and accumulated rainwater pumped off, while mesh-cover anchors and straps require regular checks.

About Dickson Family Pools & More

Ricky Dickson established Dickson Family Pools & More as a family-run business that supplies and installs pools throughout South Carolina’s Upstate. The company offers fiberglass and vinyl designs and assists owners with seasonal shutdowns. Taylors homeowners can call (864) 581-7665 for professional help with winterizing their fiberglass pool.

Contact Information:

Dickson Family Pools & More

2854 Wade Hampton Blvd Suite C, Taylors, SC 29687, United States
Taylors, SC 29687
United States

Ricky Dickson
https://www.dicksonpools.com/